 |
|
|
|
|
TYPE
Dust Proof Self Centring Chucks |
|
SECO Dust
Proof Scroll Operated Self Centering Chuck is the result of
continuous Research & Development by our team committed to
solve chucking problems. |
SALIENT
FEATURES
BODY :
SG Iron body with hardened and ground Body Jaw Ways and
Body knob.
SCROLL :
Ni. Cr. alloy steel case hardened upto 45 HRc Scroll
with ground thread flanks from both sides.
JAWS :
op Hard Jaws and Base Jaws are made of alloy steel, Case
Hardened up to 60 HRc. Jaws teeth ground from both
sides. Jaws serrations are also ground.
PINION :
Pinion made of alloy steel Case Hardened up to 50 HRc.
SECO Dust Proof Chucks are boon for mass production
workshops where dust causes periodic breakdown in
chucks, thus reducing productivity. This new design of
scroll operated self centering chuck has serrated base
jaws mountable with reversible Top Hard Jaws or Top
Soft Jaws.(Both Top Hard Jaws and Top Soft Jaws are
standard accessories with the chuck). The serrated
base jaws have a limited movement and are also sealed
against any dust entry into the chuck.Therefore the
life of the Dust Proof SECO Chucks is increased by 60%
and also the loss in productivity because of essential
periodic cleaning of chuck is eliminated. This saving
in terms of increased productivity and increased life
of chuck makes SECO Dust Proof Chuck an indispensable
equipment for any mass production workshop.
The limitation of limited movement of Base Jaws is
overcome by serrations on which the Top Jaws can be
shifted inward and outward to hold any diameter with
in the permissible gripping range of Dust Proof
Chucks.
|
|
|
|
|
|
A |
160 |
200 |
250 |
315 |
|
B H7 |
125 |
160 |
200 |
260 |
|
P |
140 |
176 |
224 |
286 |
|
C |
71 |
81 |
90 |
100 |
|
D |
37 |
50 |
70 |
100 |
|
E H7 |
11 |
14 |
17 |
17 |
|
F |
27 |
30 |
35 |
40 |
|
G |
M8
X
1.25 |
M10
X
1.5 |
M12
X
1.75 |
M12
X
1.75 |
|
H |
118 |
136 |
148 |
160 |
|
J |
2 |
3 |
3 |
3 |
|
K |
M10 |
M10 |
M12 |
M12 |
|
O |
20 |
20 |
24 |
32 |
|
R |
4 |
4 |
5 |
5 |
|
|
|
